Skip to content

Cart

Your cart is empty

Article: COLMI V69 App Guide: Setting Up Da Fit, Pairing and Fixing Common Problems

COLMI V69

COLMI V69 App Guide: Setting Up Da Fit, Pairing and Fixing Common Problems

The COLMI V69 is set up and controlled through a free companion app called Da Fit. The app is where you pair the watch, choose which notifications reach your wrist, download watch faces and look back at your heart rate, sleep and activity history. This guide walks through the full setup and covers the problems V69 owners ask us about most.

Which app does the COLMI V69 use?

The V69 uses Da Fit, which is free on Google Play and the App Store and works with Android 4.4 or later and iOS 8.0 or later. Not every COLMI device uses Da Fit, so if you own more than one, check this table:

COLMI device Companion app
V69, V72 Da Fit
V73, V89, i28 Ultra, C8 Max, P86 COLMI Fit
M42 FitCloudPro
R02, R03, R06, R07, R09, R10 and R12 smart rings QRing
R11 smart ring Da Rings

For any other model, the correct app is listed in the App Download tab on its product page.

Before you start

  • Charge the watch. The V69 uses a 2-pin magnetic cable and takes about two hours to charge fully.
  • Turn on Bluetooth on your phone. On Android, allow the Location or Nearby devices permission when Da Fit asks, because Android needs it to find Bluetooth devices.
  • Don't pair the watch from your phone's Bluetooth menu first. Start the pairing from inside the Da Fit app.

How to pair the V69 with Da Fit

  • Install Da Fit, then sign in or create an account.
  • Allow the permissions Da Fit asks for: Bluetooth, Location or Nearby devices, and Notifications. Without them, the app can't find the watch or forward your alerts.
  • Open the device section of the app and choose to add a new device.
  • Keep the watch close to your phone and select your V69 from the list. If several devices appear, check the device name in the watch's settings.
  • Accept the pairing request on your phone, and on the watch if it asks. The first sync can take a minute or two.

Turning on Bluetooth calls

The V69 uses two Bluetooth connections: a low-energy Bluetooth 5.2 connection for the app, and a separate classic Bluetooth connection for phone calls. That's why your phone may list the watch twice. To make and take calls on your wrist:

  • Make sure Phone Call is switched on in the watch's settings.
  • When your phone shows a second pairing request for the watch's call connection, accept it.
  • If no request appears, open your phone's Bluetooth settings and pair the watch's call entry from there. This is the one exception to the "pair from the app" rule.

Getting notifications on your wrist

  • Android: give Da Fit Notification access (usually under Settings, Apps, Special app access) and then choose which apps to forward inside Da Fit.
  • iPhone: make sure Da Fit is allowed to send notifications, and if your iPhone asks to share system notifications with the watch, allow it.
  • Check that Do Not Disturb is switched off on the watch.

Keep the list of forwarded apps short. Calls, texts and your main messaging app are usually enough, and fewer alerts also means better battery life.

Changing watch faces

Da Fit includes a Watch Face Market. Choose a face in the app and send it to the watch, keeping your phone nearby until the transfer finishes. You can also switch between faces already stored on the watch from its Watch Face menu. For a full walkthrough, see our guide to changing watch faces on a COLMI smartwatch.

What the V69 tracks in Da Fit

Once it's paired, Da Fit shows your steps, distance and calories, sleep with a sleep quality score, heart rate with optional 24-hour monitoring, blood oxygen (SpO2), blood pressure readings and your exercise records. The app also controls move and drink reminders, alarms, Do Not Disturb, the cycle tracker, weather and music controls.

Health readings from consumer wearables are for general wellbeing and are not a medical diagnosis. Speak to a healthcare professional about any health concern.

Battery life tips

COLMI quotes 8 to 10 days of use from the V69's 710mAh battery. Continuous heart rate monitoring, lots of notifications, a bright screen and frequent calls all shorten that. Battery Saving Mode and a shorter screen timeout make the biggest difference.

Fixing common Da Fit problems

The watch won't connect or keeps disconnecting

  • Remove the watch from your phone's Bluetooth list, close Da Fit, restart your phone and pair again from inside the app.
  • On Android, exclude Da Fit from battery optimisation so the phone doesn't close it in the background.
  • Make sure the watch isn't still connected to another phone or tablet.

My data isn't syncing

Open Da Fit with the watch nearby and refresh the home screen. If data still doesn't appear, check for a firmware update in the app's Upgrade option, keeping both devices charged while it installs.

Calls work but notifications don't, or the other way round

Calls and notifications use different connections. Check both the notification settings in Da Fit and the phone's Bluetooth call pairing described above.

Starting again from scratch

As a last resort, use Reset on the watch, remove it from Da Fit and from your phone's Bluetooth list, then pair again. A reset erases any data on the watch that hasn't synced yet.

Need more help?

Read our full Da Fit app guide and our COLMI troubleshooting guide, or contact our support team at hello@colmi.store. Still choosing a watch? Compare the V69 with the rest of the COLMI V Series.